M5 Bottom Mic

The high-frequency expert.

The M5 Bottom Mic is an additional microphone designed to complement your recordings by adding brilliance, timbre and definition.

Its copper-gold design and internal architecture make it a precision tool for demanding creators.

Sound signature:
brilliance & timbre

Optimised for high frequencies, the M5 brings definition, presence and clarity without harshness. It highlights attacks, strings, timbres and the subtle details of percussion. A natural reinforcement that blends perfectly into the mix.

Built-in technologies

The M5 features a Helmholtz resonator that enriches timbre and presence. Its built-in phase inversion ensures perfect coherence with the main microphone. An internal equaliser and a transformer finely shape the high end.


Positioning: the precision additional microphone

The M5 Bottom Mic is a complementary microphone, designed to enrich an existing recording. It reveals the useful highs, timbres and fine textures that main microphones often leave behind. A precision tool for studios, drummers and demanding creators.

Recommended uses

Ideal for hi-hat, ride, snare bottom, beater, kick and cajón. It improves the clarity of attacks, timbres and high frequencies. A versatile microphone, but always an additional one.
The M5 adds spice to your drum recordings.

Why it is unique

The M5 Bottom Mic creates a new category: the precision additional microphone. It complements, reveals and refines without replacing the main microphones. A tool designed for controlled brilliance and the musicality of detail.


Technical details & performance

Elegance and precision combined in an additional microphone designed to reveal high frequencies and enrich the timbre.

Frequency response

400Hz – 15KHz

Helmholtz resonance

5 KHz

low-cut filter

500Hz

high-cut filter

15kHz

Design & manufacturing

Technical specifications

M5 Bottom Mic

The engineering behind the sound

Size: mini

Body: copper

Finish: metallic copper gold

Texture: powder-coated micro-grain

Ring: — (one-piece body)

Durability: robust construction for studio & stage use

UV protection: finish resistant to outdoor radiation

Dimensions: length 16 cm, body width 4 cm

Weight: 250 g

Made in France


Capsule type: high-end cardioid dynamic

Sound shaping
Capsule tuned to 5 kHz by Helmholtz resonance, 500 Hz low-cut filter, 15 kHz high-cut filter

Output transformer: balanced output, studio quality

Impedance: 70 Ω

Frequency response: 400 Hz – 15 kHz

Signal-to-noise ratio: 75 dB

Sensitivity
: 1.5 mV

Headroom: exceptional — no saturation even in close miking.

Sound pressure: 180 dB SPL


Raw capture — snare + hi-hat with M5 Bottom Mic

Listen to a direct recording made with an SM57, complemented by a U87 and by the M5 Bottom Mic as an additional microphone.

No processing has been applied: no EQ, no compression, no reverb. What you hear is the natural signature of the M5: more brilliance, more timbre, more precision in the high frequencies.

SM57 + U87

Version without the M5 Bottom Mic

Listen to a take recorded with an SM57 on the snare and a U87 as overhead. The sound is deliberately raw: less brilliance, less timbre, a narrower presence in the high frequencies. This comparison highlights what the M5 Bottom Mic brings when used as an additional precision microphone.

e

SM57 +U87 + M5 (-6 dB)

Version with the M5 Bottom Mic as reinforcement

Listen to the same take with an M5 Bottom Mic added on the hi-hat, attenuated by -6 dB for a strictly additional role. Here the M5 brings brilliance, timbre and definition, revealing the hi-hat attacks and the nuances of its opening without changing the overall balance. No processing has been applied: what you hear is the natural presence the M5 adds to a classic recording.

Tests – OVEDEL Lab

The M5 was tested raw, with no EQ or compression: on a cajon with an RE20, under the snare with an SM57, on the kick drum beater side with an Audix D6, and on the hi-hat. Even mixed low, it adds clarity and impact with no phase alignment needed. Listen to the examples on the shop page.

Making-of

Every LCREA microphone is handmade to order in our Bordeaux workshop: machining of the copper body, in-house powder coating, assembly of the electronics and laser engraving of the serial number. Allow 4 to 6 weeks between order and shipping. The workshop can be visited by appointment.

Interviews

The first stories from artists recording with our microphones will appear here soon. Already using an LCREA microphone? Write to us: we would love to share your experience.

IMMERSIVE IMAGES

Discover
the microphone
S1 Expression

Discover
the microphone
S2 Diffusion

Discover
the microphone
S3 Captation

Discover
the microphone
H1 Voltium

Laser engraving, colour, finish: every LCREA microphone can be customised to reflect who you are.

Your custom microphone

Our microphones deliver exceptional sound quality and are fully customisable to meet your needs. Customise yours now.