S3 CAPTATION

Faithful to acoustic instruments

The S3 Captation is a studio microphone designed for acoustic instruments. Where other microphones impose their own colour, the S3 renders the instrument exactly as it sounds: the wood of a guitar, the body of a cello, the attack of a percussion instrument, the breath of a wind instrument.

Its robust architecture and exceptionally low output impedance make it a reliable capture tool, equally at home in the studio, on stage or on location.

Sound signature:
 natural, warm & controlled

Designed for the instrument, the S3 Captation delivers a warm, velvety sound with no artificial brilliance. It preserves the presence of the mids and highs while keeping the low end perfectly under control, with no boominess or muddiness. The result is a signal that sits in the mix straight away and needs no correction: what you hear in the room is what you get at the desk.

Built-in technologies

The S3 Captation is built around a cardioid dynamic capsule and electronics with an integrated JFET preamplifier, whose character is close to that of a valve stage. Equalisation is provided by a Pultec-type four-band passive RLC equaliser, set in the workshop, and the signal is delivered by a studio-quality balanced output transformer.


Its 10-ohm output impedance is its most remarkable feature. Such a low impedance makes the signal far less sensitive to external interference and cable length, and preserves the attack on any preamplifier.


Positioning: the microphone dedicated to acoustic instruments

The S3 Captation is a faithful capture microphone, designed to put the instrument front and centre, exactly as it is. It captures the textures, resonances and attack details that standard microphones too often smooth out. A precision tool for studios, sound engineers and musicians recording their own instrument.

Recommended uses

It is the tool of choice for acoustic guitar, strings, percussion, brass and woodwind. It excels on highly dynamic sources, which its 150 dB SPL handling absorbs without flinching. Its neutrality also makes it an excellent microphone for location recording and ambience, and some voices — deep, textured, natural — find in it a rendering that overly bright microphones cannot give them.

Why it is unique

Most instrument microphones flatter the source: they add brilliance, scoop the low mids, impose a signature. The S3 does the opposite. It was designed to render the true timbre of the instrument without dressing it up — a demanding choice, which means trusting the instrument and the musician rather than equalisation.


Its very low output impedance adds rare reliability: on long cables, in multi-mic setups or on stage, the signal stays clean where others degrade.


Technical details & performance

Fidelity and warmth combined in a microphone designed to capture the instrument without betraying it.

Frequency response

20Hz – 20kHz

Sensitivity

13 mV/Pa at 1 kHz

Sound pressure

150 dB SPL

Impedance

10 Ohms

Design & manufacturing

Technical specifications

S3 CAPTATION

The engineering behind the sound

Size: standard studio

Body: copper

Finish: gold or anthracite grey as standard – other colours on request

Texture: powder-coated micro-grain

Ring: polished brass

Durability: robust construction for studio & stage use

UV protection: finish resistant to outdoor radiation

Dimensions: length 22 cm, body diameter 4 cm

Weight: 350 g

Customisation: laser engraving on request

Supplied with: mounting clip – cable optional

Warranty: 3 years

Made in France


Capsule type: high-end dynamic

Sound shaping

Preamplifier: built-in JFET electronics, character close to a valve

Equalisation: PULTEC-type 4-band passive RLC equaliser, set in the workshop

Output transformer: balanced output, studio quality

Impedance: 10 Ω

Frequency response: 20 Hz – 20 kHz

Signal-to-noise ratio: above 65 dB

Sensitivity
: 13 mV/Pa at 1 kHz

Sound pressure: 150 dB SPL


Tests – OVEDEL Lab

The S3 Captation was compared with the S1 Expression on a voice, then with the Neumann U87, the Schoeps CMC5 and the Shure SM57. It stands out for its presence in the mids, with controlled highs and lows, which suits acoustic instruments. Listen to the comparisons on the shop page.

Making-of

Every LCREA microphone is handmade to order in our Bordeaux workshop: machining of the copper body, in-house powder coating, assembly of the electronics and laser engraving of the serial number. Allow 4 to 6 weeks between order and shipping. The workshop can be visited by appointment.

Interviews

The first stories from artists recording with our microphones will appear here soon. Already using an LCREA microphone? Write to us: we would love to share your experience.

IMMERSIVE IMAGES

Discover
the microphone
S1 Expression

Discover
the microphone
S2 Diffusion

Discover
the microphone
M5 Bottom Mic

Discover
the microphone
H1 Voltium

Laser engraving, colour, finish: every LCREA microphone can be customised to reflect who you are.

Your custom microphone

Our microphones deliver exceptional sound quality and are fully customisable to meet your needs. Customise yours now.